7-4
It is possible to feed and reverse the media automatically for specified amount when the plotter receives the
cuttng data.
"Pre feedng" to prevent the shftng of meda can be done automatcally. Also, the meda wll be unrolled from the
roll before cuttng when rolled meda s to be used.
P.7-6
"Perform Automatc Pre Feed When Meda s Set (Intal Feed)"
P.7-8
"Settng Feed Speed for Pre Feed"
Supplement
The settng for AUTO PRE FEED when cuttng data s receved s mantaned even f the power s turned off.
Settng of the AUTO PRE FEED length s not lnked to the settng of the page length. Change the settng for the page length f the
cuttng area s to be long.
If data s receved and auto meda transfer s performed once, even f (cut n the same area) data s receved agan, auto meda
transfer wll not take place.
Operation
Supplement
Perform the settngs n Normal menu.
1
Press the [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) s dsplayed.
3
Press the POSITION ( ) key.
MEDIA SETTING screen (2/3) s dsplayed.
4
Press the [2] key (AUTO PRE FEED).
AUTO PRE FEED screen s dsplayed.
7.2
Perform Automatic Pre Feed When Cut
Data is Received
