6-17
SET BLADE GROUP (blade wear group settings)
These wll be recorded under the Condton No. group.
Operation
Supplement
Perform the settngs n Normal menu.
1
Press the [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press [1] key (TOOL).
TOOL SETTING screen (1/3) s dsplayed.
3
Press [2] key (BLADE WEAR SETUP).
BLADE WEAR SETUP screen s dsplayed.
4
Press [2] key (SET BLADE GROUP).
The Blade Group settngs screen s dsplayed.
* Dsplay may vary dependng on the selected tool condton number.
5
Press the POSITION ( )keys to select the tool condton
number (CONDITION No.).
Supplement
The Condton No's. are dvded nto a maxmum
of 9 avalable groups. Condton No.1 for
plotting pens and is fixed as group 1; however,
Condtons 0, and 2-8 and assocated groups
can be altered. Please note that estmated
dstance cannot be calculated n group 0.
6
Press the POSITION (
) key and ncrease or decrease the
settng value.
