6-10
DISTANCE ADJUST value corrects any devaton n the length of cut or plotted lne segments, whch occurs
depending on the media being used. DISTANCE ADJUST value for the deviation is specified as a percentage of
the total dstance. For example, a settng of +0.05% adjusts a dstance of 2 m (2,000 mm) by 2,000 x 0.05% = 1
mm, makng 2,001 mm.
Supplement
Ths settng wll be saved even f the power s shut off.
Operation
Supplement
Perform the settngs n Normal menu.
1
Press the [COND/TEST] key.
CONDITION settng screen (1/3) s dsplayed.
2
Press [3] key (AREA).
AREA PARAMETERS settng screen (1/1) s dsplayed.
3
Press the [4] key (DISTANCE ADJUST).
DISTANCE ADJUST settng screen s dsplayed.
4
Press the [1] key (X).
X DISTANCE ADJUST settng screen s dsplayed.
Supplement
Settng range for adjustment value s -2.00%
to +2.00%.
Press the [FAST] key to change the settng
dgts.
5
Press the POSITION (
) key and ncrease or decrease the
settng value.
6.4
Setting the Distance Adjust
