sq 16 Datalogger
Operating Manual
Page 19
www.grantinstruments.com
In the example below, 12 type T thermocouples are configured in single ended mode.
Note, the software will always offer the next available channel for the selected probe type by
default.
4.6.4 Editing Sample and Logging intervals
The Default logging method is Interval and default Sample and Logging Intervals are 1 per
second. These may be changed by clicking on the
which opens the Logging Method
menu:
Clicking on the
opens the Logging Method menu.
Logging Method
This specifies how the readings taken for a channel are logged to memory, there are
following different logging options:
Interval
Readings are stored at every Logging Interval. This is the default setting.
