Grant CRF-1 H00, Operating Manual

Page: 56 / 60

CRF-1 Operating Manual Page 56 of 60 33801-V4 DMN S90
Appendix 4 Unpacking instructions
THE CRF-1 IS A DELICATE SCIENTIFIC INSTRUMENT AND SHOULD BE
HANDLED WITH CARE AT ALL TIMES. THESE INSTRUCTIONS
MUST BE
FOLLOWED TO UNPACK THE UNIT.
WARNING: ENSURE TRANSIT BOLT IS REMOVED BEFORE OPERATING
THE UNIT, SEE TRANSIT BOLT INSTRUCTIONS BELOW.
1. Remove the Top foam by inserting a finger
into the top hole and pulling it gently but firmly
upwards.
2. Once the top foam is removed, the unit can
be gripped by the bottom foam hand-hold and
with one hand on the sample plate.
3. Grasp the unit securely and draw it from the
case.
4. Carefully place the unit upright on a firm
surface. Undo the strap and remove the unit
from the bottom foam.
5. Remove the unit from the bag, and consult
the separate instructions to remove the transit
bolt.
6. RETAIN ALL PACKAGING AS IT
MUST BE
USED TO REPACK THE UNIT FOR
FURTHER TRANSPORTATION. SEE OVER
FOR PACKING INSTRUCTIONS.