Operating Instructions
7306020
9
4.2
Charging the battery pack
1.
Connect the plug to the charger before charging.
2.
Connect the quick charger to the power source.
3.
Slide the battery pack into the charger in the direction of the arrow as indicated on the
charger.
4.
Insert the battery pack and make sure the red light on the charger is “ON”. The battery pack
will now start the charging cycle.
5.
The light will turn green when charging is complete. The battery pack is now ready for use.
6.
Your new battery pack is not charged. You must fully charge it before using it for the first
time.
7.
When trying to charge a battery pack on a machine that has just been in use, the charge
indicator sometimes does not light up. In this case, let the battery cool down for a while, then
reinsert it and try charging it again.
8.
If you charge a new battery pack or a battery pack that has not been used for a long time, it
may not take up a full charge. This is a normal condition and does not indicate a problem.
The battery pack can be fully recharged after it has been fully discharged several times.
9.
Disconnect the charger from the power source when charging is complete.
10.
Please remove the battery from the unconnected charger for storage.
