Instruction manual
Projector Ceiling Mount
Model: GPCM-G series
Please read before using
Thank you for purchasing our
products. Please read the
instruction manual carefully
to ensure this projector mount
is suitable for your projection
equipment.
Warning
For safety, the minimum weight of ceiling must be 40KG;
Attention
Please do not incline the projector extremely.
Please do not
take apart
Please do not take apart the accessories of projector
ceiling mount.
Cautious
:
Use the screw for adjustment
A. Ceiling Installation with the main bar.
1. Make sure the ceiling can support a
40kg load.
2. Use the screw on the back to adjust
the extension bar to a desirable height,
put the cables into cable duct.
B. Fix the projector by connecting the
angle adjuster and the main bar.
1. Adjust the desirable angle.
2. Align the center position of the
projector and mount.
3. Connect the cables to the projector.
Remark: The 3 screws side on angle
adjuster is the front position.
C. Angle adjustment
1. Using the allen key to adjust the 2
screws for horizontal adjustment.
2. Using the allen key to adjust the
other 2 screws for vertical
adjustment.
Vertical adjustment:
UP 1 ; DOWN 8
3. Using the allen key to adjust the
length of the installation arms.
Adjustment screw
Use the screw
for adjustment
Horizontal
adju/- 3
Horizontal rotation: +/- 4
#11- 3751 North Fraser Way,
Marine Way
Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: 1-604-412-9777
Fax: 1-604-412-9796
Website: www.grandviewscreen.ca
Grandview Crystal Screen Canada Ltd.
