Grandstream Networks UCM6510, User Manual

Page: 373 / 483

P a g e | 372
UCM6510 IP PBX User Manual
Version 1.0.20.31
Extension Ranges
The default extension range assignment is:

User Extensions: 1000-6299
User Extensions is referring to the extensions created under Web
GUI

Extension/Trunk

Extensions page.

Pick Extensions: 4000-4999
This refers to the extensions that can be manually picked from end
device when being provisioned by the UCM6510. There are two related
options in zero config page

Auto Provision Settings, "Pick Extension
Segment" and "Enable Pick Extension". If "Enable Pick Extension"
under zero config settings is selected, the extension list defined in "Pick
Extension Segment" will be sent out to the device after receiving the
device's request. This "Pick Extension Segment" should be a subset of
the "Pick Extensions" range here. This feature is for the GXP series
phones that support selecting extension to be provisioned via phone's
LCD.

Auto Provision Extensions: 5000-6299
This sets the range for "Zero Config Extension Segment" which is the
extensions can be assigned on the UCM6510 to provision the end
device.

Conference Extensions: 6300-6399

Ring Group Extensions: 6400-6499

Queue Extensions: 6500-6599

Voicemail Group Extensions: 6600-6699

IVR Extensions: 7000-7100

Dial By Name Extensions: 7101-7199

Fax Extensions: 7200-8200
Call Failure Tone Settings
SIP Trunk Prompt Tone
Prompt Tone Settings tab has been added to the UCM to help users choose which prompt will be
played by the UCM during call failure, the following voice message responses have been added and can
be set to be played for 4XX, 5XX, and 6XX call failures:

Default for 404 and 604 status codes:
“Your call can’t be completed as dialed. Please check the
number and dial again.
”

Default for 5xx status codes:
“Server error. Please check your device
.
”

Default for 403 and 603 status codes:
“The call was rejected by the server. Please try again later.”

Default for all other status codes:
“All circuits are busy now. Please try again later
.
”