Grandstream Networks UCM6510 User Manual Download Page 305

Page: 305 / 483

P a g e

304

UCM6510 IP PBX User Manual

Version 1.0.20.31

Static Agents limitation:

To guarantee a high level of audio quality with the call queue feature, UCMs will limit the number of static

agents allowed to be assigned depending on the UCM model used. If the user attempts to configure the

number of static agents to be more than the maximum allowed number, a warning message will appear.



Voicemail.



Queues.



Ring Group.



Voicemail Group.



IVR.



External Number.

Report Hold Time

If enabled, the UCM6510 will report to the agent the amount of time of the caller

waited before being connected. The default is disabled.

Replace Display Name

If enabled, the UCM will replace the caller display name with the Call Queue name

so that the caller knows the call is incoming from a Call Queue.

Enable Feature Codes

Enable feature codes option for call queue. For example, *83 is used for “Agent

Pause”.

Note:

Callers can no longer use feature codes in established callbacks.

Dynamic Login

Password

If enabled, the configured PIN number is required for dynamic agent to log in. The

default setting is disabled.

Alert-Info

Configure the call destination for the call to be routed to if no agent in this call

queue answers the call.

Agents

Go to “Agents” Tab and Select the available users to be the static agents in the

call queue. Choose from the available users on the left to the static agents list on

the right. Click on

to choose. And use UP and Down arrow to select the

order of the agent within the call queue.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands