Grandstream Networks UCM6510 User Manual Download Page 262

Page: 262 / 483

P a g e

261

UCM6510 IP PBX User Manual

Version 1.0.20.31

Once created, the Web GUI will display scheduled conference in Conference Schedule. Please see figure

below:

Figure 152: Video Conference Schedule

Once the conference room is scheduled, at the kick time, all users will be removed from conference room

and no extension is allowed to join the conference room anymore. At the scheduled conference time,

UCM6510 will send INVITE to the extensions that have been selected for conference.

--------------------------------------------------------------------------------------------------------------------------------------------

Notes:



Video conferencing can be resource-intensive and may cause performance issues with the UCM when

used.



To ensure the best experience, please use Google Chrome (v67 or higher) or Mozilla Firefox (v60).

--------------------------------------------------------------------------------------------------------------------------------------------

Wave WebRTC Video Calling & Conferencing

Web audio and video calls and conferencing can now be achieved throug

h the UCM’s new WebRTC page.

To get started with this new feature, please make sure to:

1. Navigate to

Value-Added Features



WebRTC

and enable WebRTC support.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands