Grandstream Networks UCM6510 User Manual Download Page 238

Page: 238 / 483

P a g e

237

UCM6510 IP PBX User Manual

Version 1.0.20.31

matches the DID pattern, the call will be allowed to go through.

Configure the number of digits to be stripped in "Strip" option.



Dial By Name



External Number



Callback



Announcement

Inbound Route: Prepend Example

UCM6510 now allows user to prepend digits to an inbound DID pattern, with strip taking precedence over

prepend. With the ability to prepend digits in inbound route DID pattern, user no longer needs to create

multiple routes for the same trunk in order to route calls to different extensions.

Figure 129: Inbound Route feature: Prepend

The following example demonstrates the process:

1. If Trunk provides a DID pattern of 18005251163.

2. If

Strip

is set to 8, UCM6510 will strip the first 8 digits.

3. If

Prepend

is set to 2, UCM6510 will then prepend a 2 to the stripped number, now the number

become 2163.

4. UCM6510 will now forward the incoming call to extension 2163.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands