Grandstream Networks UCM6510 User Manual Download Page 227

Page: 227 / 483

P a g e

226

UCM6510 IP PBX User Manual

Version 1.0.20.31

blacklist settings apply to all outbound routes.

Figure 119: Outbound Blacklist

Table 67: Blacklist Manage - Matching Rules

Blacklist Manage

Add Blacklist Rule

Allows to define a rule based on number(s) or pattern(s) as blacklist entry.

Pattern rules:

: Any digit from 2-9

: Any digit from 0-9

: Any digit from 1-9

: Wildcard, matching one or more characters

: Wildcard, matching zero or more characters immediately

: Hyphens are used mainly to improve readability and are not involved in

pattern matching.

Note

: Users can export outbound route blacklists and delete all blacklist entries. Additionally, users can

also import blacklists for outbound routes.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands