P a g e
|
140
UCM630xA Series User Manual
Version 1.0.9.10
Click on
to edit the global template.
The window for editing global template is shown in the following figure. In the “Options” field, after entering the
option name key word, the options containing the key word will be listed. Users could then select the options to
be modified under the global template.
Figure 66: Edit Global Template
The added options will show in the list. Users can then enter or select value for each option to be used in the
global template. On the left side of each added option, users can click on
to delete this option from the
template. On the right side of each option, users can click on
to reset the option value to the default value.
Click on “Save” to save this global template.
The created global templates will show in the Web GUI
Value-added Features
Ze
ro Config
Global
Templates page. Users can click on
to delete the global template or delete multiple selected templates
at once.
