P a g e
|
115
UCM630xA Series User Manual
Version 1.0.9.10
Figure 56: HA Settings
Table 27: HA Settings parameters
Parameter
Description
High Available Enable
Enables/disables the HA functionality. By default, is Disabled.
Force switch
After clicking the button, the active/standby switch will be enforced.
HA Station Type
The master and slave static configuration of the device, The real active / standby is
decided dynamically by the active / standby.
HA Virtual IP
To carry the service, the main and standby computers should be set the same, and the
intranet terminal should register and use the IP address.
HA Peer IP
Local IP address of HA peer device.
HA Peer MAC Address
Need to specify this peer MAC address while using the UCM RemoteConnect service.
Heartbeat Port
The number of the heartbeat port should be consistent with the peer heartbeat port.
Heartbeat Timeout
Period (s)
If timeout occurs, services will be transferred over to the Slave UCM.
Software Fault Switch
Enable Software Fault Switch
