Grandstream Networks UCM6200 Series, User Manual, Page: 464 / 469

P a g e | 463
UCM6200 Series User Manual
Version 1.0.20.38
Figure 346: Traceroute
Signaling Troubleshooting
Analog Record Trace
•
Analog Record Trace
Analog record traces are used to troubleshoot analog trunk issues (e.g., CID detection for incoming calls from
an analog trunk.
To capture analog record traces:
1.
Select FXO or FXS for "Record Ports". If the issue happens on FXO 1, select FXO port 1 to record the
trace.
2.
Select "Record Direction".
3.
Select "Record File Mode" to separate the record per direction or mix.
4.
Click on "Start".
5.
Make a call via the analog port that has the issue.
6.
Once done, click on "Stop".
7.
Click on "Download" to download the analog record trace.