Grandstream Networks UCM6200 Series, User Manual, Page: 453 / 469

P a g e | 452
UCM6200 Series User Manual
Version 1.0.20.38
Restore Configuration from Backup File
To restore the configuration on the UCM6200 from a backup file, users could go to Web
GUI
→ Maintenance → Backup → Backup/Restore .
•
A list of previous configuration backups is displayed on the web page. Users could click on of the
desired backup file to overwrite the UCM's current settings with the backup's.
•
If users have other backup files on PC to restore on the UCM6200, click on "Upload Backup File" first and
select it from local PC to upload on the UCM6200. Once the uploading is done, this backup file will be
displayed in the list of previous configuration backups for restore purpose. Click on to restore from the
backup file.
•
Users can restore backup files located on SD cards, USB disks, or NAS servers. also restore using the
backup file saved in SD card or USB device plugged into the UCM6200 or the backup available in his NAS
server connected to UCM.
Figure 337: Restore UCM6200 from Backup File
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
•
The uploaded backup file must be a tar file with no special characters like *,!,#,@,&,$,%,^,(,),/,\,space in
the file name.
•
Uploaded backup file size cannot exceed 10MB.
---------------------------------------------------------------------------------------------------------------------------------------------------
System Cleanup/Reset
Reset and Reboot
Users could perform reset and reboot under Web GUI
→ Maintenance → System Cleanup/Reset → Reset and
Reboot .
To factory reset the device, select type. There are two different reset types.