Grandstream Networks UCM6200 Series, User Manual, Page: 444 / 469

P a g e | 443
UCM6200 Series User Manual
Version 1.0.20.38
User could also filter the operation logs by time condition, IP address and/or username. Configure these
conditions and then click on .
Figure 328: Operation Logs Filter
In the figure above,
an example that shows operations made by user “support” on device with IP 192.168.40.173
from 2014-11-01 00:00 to 2014-11-06 15:38 are filtered out and displayed.
Users can either filter out specific operation logs or then click on the button to delete
the filtered results or click on the button to delete all operation logs. Note: Deleting operation
logs will generate an operation log entry detailing the action.
Upgrading
The UCM6200 can be upgraded to a new firmware version remotely or locally. This section describes how to
upgrade your UCM6200 via network or local upload.