Grandstream Networks UCM6200 Series, User Manual

Page: 330 / 469

P a g e | 329
UCM6200 Series User Manual
Version 1.0.20.38
Figure 224: Dial By Name Group In Inbound Rule
Username Prompt Customization
Starting from fw 1.0.15.x, the Dial By Name feature can use the recorded name prompt of a user to announce
his/her name assigned to the dialed extension. If no name prompt greeting exists, the name will be spelt out like
in previous versions.
There are two ways to customize/set new username prompt for an extension:
Upload Username Prompt File from Web GUI
1.
First, Users should have a pre-recorded file respecting the following format:
•
PCM encoded / 16 bits / 8000Hz mono.
•
In .GSM or .WAV format.
•
File size under 5M.
•
Filename must be set as the extension number. For example, the recorded file name 1000.wav will
be used for extension 1000.
2.
Go under web GUI PBX Settings → Voice Prompt → Username Prompt and click on
button.
3.
Select the recorded file to upload it and press Save and Apply Settings.
•
Click on to record again the username prompt.
•
Click on to play recorded username prompt.