Grandstream Networks UCM6200 Series Page 275 User Manual Download

Page: 275 / 469

P a g e

274

UCM6200 Series User Manual

Version 1.0.20.38

PAGING AND INTERCOM GROUP

Paging and Intercom Group can be used to make an announcement over the speaker on a group of phones.

Targeted phones will answer immediately using speaker. The UCM6200 paging and intercom can be used via

feature code to a single extension or a paging/intercom group. This section describes the configuration of

paging/intercom group under Web GUI

→

Call Features

→

Paging/Intercom

Configure Paging/Intercom Group

•

Click on "Add" to add paging/intercom group.

•

Click on

to edit the paging/intercom group.

•

Click on

to delete the paging/intercom group.

•

Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the SIP

INVITE message sent to the callee in paging/intercom call.

Configure Multicast Paging

Figure 175: Multicast Paging

Summary of Contents for UCM6200 Series






















































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands

Grandstream Networks UCM6200 Series, User Manual

Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands