Grandstream Networks UCM6200 Series, User Manual

Page: 205 / 469

P a g e | 204
UCM6200 Series User Manual
Version 1.0.20.38
Outbound Route CID
Attempt to use the configured outbound route CID. This CID will not be used
if DOD is configured. It is formatted as "name<number>" or "<number>" or
"number".
Send This Call Through Trunk
Use Trunk Select the trunk for this outbound rule.
Strip
Allows the user to specify the number of digits that will be stripped from the
beginning of the dialed string before the call is placed via the selected trunk.
Example:
The users will dial 9 as the first digit of a long-distance calls. However, 9
should not be sent out via analog lines and the PSTN line. In this case, 1
digit should be stripped before the call is placed.
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Use Failover Trunk
Failover Trunk
Failover trunks can be used to ensure calls can still be made in the scenario
that the main trunk is congested or down.
UCM6200 support up to 10 failover trunks.
Example: The user's primary trunk is a VoIP trunk and the user would like
to use the PSTN when the VoIP trunk is not available. The PSTN trunk can
be configured as the failover trunk of the VoIP trunk.
Strip
Allows the user to specify the number of digits that will be stripped from the
beginning of the dialed string before the call is placed via the selected trunk.
Example:
The users will dial 9 as the first digit of a long-distance calls. However, 9
should not be sent out via analog lines and the PSTN line. In this case, 1
digit should be stripped before the call is placed.
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Time Condition
Time Condition
Outbound routes can be configured to use different trunks based on time
conditions such as holidays, office times, specific times, etc.
Outbound Blacklist
The UCM6200 allows users to configure blacklist for outbound routes. If the dialing number matches the blacklist