Grandstream Networks UCM6102 User Manual Download Page 92

Page: 92 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 91 of 305

PROVISIONING

OVERVIEW

Grandstream SIP Devices can be configured via Web interface as well as via configuration file through

TFTP/HTTP/HTTPS download. All Grandstream SIP devices support a proprietary binary format

configuration file and XML format configuration file. The UCM6100 provides a Plug and Play mechanism to

auto-provision the Grandstream SIP devices in a zero configuration manner by generating XML config file

and having the phone to download it within LAN area. This allows users to finish the installation with ease

and start using the SIP devices in a managed way.

To provision a phone, three steps are involved, i.e., discovery, configuration and provisioning. This section

explains how Zero Config works on the UCM6100. The settings for this feature can be accessed via Web

UI->

PBX

Zero Config

CONFIGURATION ARCHITECTURE FOR END POINT DEVICE

Started from firmware version 1.0.7.10, the end point device configuration in zero config is divided into the

following three layers with priority from the lowest to the highest:



Global

This is the lowest layer. Users can configure the most basic options that could apply to all

Grandstream SIP devices during provisioning via Zero config.



Model

In this layer, users can define model-specific options for the configuration template.



Device

This is the highest layer. Users can configure device-specific options for the configuration for individual

device here.

Each layer also has its own structure in different levels. Please see figure below. The details for each layer

are explained in sections

[GLOBAL CONFIGURATION]

[MODEL CONFIGURATION]

and

[DEVICE

CONFIGURATION]

Summary of Contents for UCM6102





















































































































































































































































































































Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands

Grandstream Networks UCM6102, User Manual

Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands