Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Page 84 of 305
Table 23: Create New Office Time
Start Time
Configure the start time for office hour.
End Time
Configure the end time for office hour
Week
Select the work days in one week.
Show Advanced Options
Check this options to show advanced options. Once selected, please
specify "Month" and "Day" below.
Month
Select the months for office time.
Day
Select the work days in one month.
Select "Start Time", "End Time" and the day for the "Week" for the office time. The system administrator
can also define month and day of the month as advanced options. Once done, click on "Save" and then
"Apply Change" for the office time to take effect. The office time will be listed in the web page as the figure
shows below.
Figure 51: Settings->Time Settings->Office Time
Click on
to edit the office time.
Click on
to delete the office time.
Click on "Delete Selected Office Times" to delete multiple selected office times at once.
HOLIDAY
On the UCM6100, the system administrator can define "holiday", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure holiday, go to
Web UI->
Settings
->
Time Settings
->
Holiday
. Click on "Create New Holiday" to create holiday time.
