Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Page 295 of 305
Table 104: Data Sync Configuration
Enable Backup
Enable the auto backup function. The default setting is "No".
Account
Enter the Account name on the SFTP backup server.
Password
Enter the Password associate with the Account on the SFTP backup
server.
Server Address
Enter the SFTP server address.
Backup Time
Enter 0-23 to specify the backup hour of the day.
Before saving the configuration, users could click on "Test Connection". The UCM6100 will then try
connecting the server to make sure the server is up and accessible for the UCM6100. Save the changes
and all the backup logs will be listed on the web page. After data sync is configured, users could also
manually synchronize all data by clicking on
instead of waiting for the backup time
interval to come.
RESTORE CONFIGURATION FROM BACKUP FILE
To restore the configuration on the UCM6100 from a backup file, users could go to Web
GUI->
Maintenance
->
Backup
->
Local Backup
.
A list of previous configuration backups is displayed on the web page. Users could click on
of the
desired backup file and it will be restored to the UCM6100.
If users have other backup files on PC to restore on the UCM6100, click on "Upload Backup File" first
and select it from local PC to upload on the UCM6100. Once the uploading is done, this backup file will
be displayed in the list of previous configuration backups for restore purpose. Click on
to restore
from the backup file.
