Grandstream Networks UCM6102 User Manual Download Page 145 | Manualshive

Page: 145 / 308

background image

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 144 of 305

4. Select the option in "On Duplicate Extension" to define how the duplicate extension(s) in the imported

csv file should be treated by the PBX.



Skip: Duplicate extensions in the csv file will be skipped. The PBX will keep the current extension

information as previously configured without change.



Delete and Recreate: The current extension previously configured will be deleted and the

duplicate extension in the csv file will be loaded to the PBX.



Update Information: The current extension previously configured in the PBX will be kept. However,

if the duplicate extension in the csv file has different configuration for any options, it will override

the configuration for those options in the extension.

5. Click on

to select csv file from local directory in the PC.

6. Click on "Save" to import the csv file.

7. Click on "Apply Changes" to apply the imported file on the UCM6100.

EMAIL TO USER

Once the extensions are created with Email address, the PBX administrator can click on button “Email To
User” to send the account registration and configuration information to the user. Please make sure Email

setting under web UI->

Settings

->

Email Settings

is properly configured and tested on the UCM6100

before using “Email To User”.

When click on “Email To User” button, the following message will be prompted in the web page. Click on
OK to confirm sending the account information to all users’ Email addresses.

Figure 84: Email To User - Prompt Information

The user will receive Email including account registration information and LDAP configuration. A QR code

is also generated for Mobile applications to scan it and get automatically provisioned. QR code

provisioning is supported on Grandstream Softphone GS Wave Android

TM

application.

«
...
143
144
145
146
147
...
»

Summary of Contents for UCM6102





















































































































































































































































































































Reviews:

No comments

Related manuals for UCM6102

Brand: D-Link Pages: 15

Brand: D-Link Pages: 2

Brand: Zhone Pages: 7

Brand: Zhone Pages: 1

Brand: Draytek Pages: 8

Brand: FOR-A Pages: 72

TWR-SB0410-36EVB

Brand: NXP Semiconductors Pages: 26

Brand: Matrix Switch Corporation Pages: 61

Brand: LevelOne Pages: 31

Brand: Campbell Pages: 38

Brand: Cromemco Pages: 46

Brand: Verizon Wireless Pages: 39

Brand: UfiSpace Pages: 34

Brand: Kontron Pages: 98

Brand: Z-Com Pages: 18

Brand: MICROENER Pages: 24

CNPS5X PERFORMA

Brand: ZALMAN Pages: 8

Elinx EIR508 Series

Brand: B&B Electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands