P a g e
|
68
HT813 Administration Guide
Version 1.0.1.2
Register a SIP Account
The HT813 supports 2 SIP accounts. Please refer to the following steps in order to register your accounts
via web user interface
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press
Login
to access your settings.
4. Go to
FXS
( same steps for
FXO
) web
pages and set the following:
a.
Account Active
to
Yes.
b.
Primary SIP Server
field with your SIP server IP address or FQDN.
c.
Failover SIP Server
with your Failover SIP Server IP address or FQDN. Leave empty if not available.
d.
Prefer Primary SIP Server
to
No
or
Yes
depending on your configuration. Set to
No
if no Failover
SIP Server is defined. If “
Yes”
, account will register to Primary SIP Server when failover
registration expires.
e.
Outbound Proxy:
Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.
f.
SIP User ID
: User account information, provided by VoIP service provider (ITSP). Usually in the
form of digit similar to phone number or actually a phone number.
g.
Authenticate ID
: SIP service subscriber’s Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
h.
Authenticate Password
: SIP service subscriber’s account password to register to SIP server of
ITSP. For security reasons, the password will field will be shown as empty.
i.
Name
: Any name to identify this specific user.
5. Press
Apply
at the bottom of the page to save your configuration.
