Grandstream Networks GXV3240D, Administration Manual

Page: 19 / 84

Firmware Version 1.0.1.54 GXV3240D Administration Guide Page 19 of 83
WI-FI SETTINGS

Tap on " Wi-Fi " to turn on/off Wi-Fi connection. By default it's turned off.

Tap on " Wi-Fi Settings " to set up and manage wireless access points. This option is available only
when Wi-Fi is turned on.

View available Wi-Fi networks . A list of available Wi-Fi network within the range will be displayed
in "Wi-Fi Settings" menu.

Scan . Press MENU button and select "Scan" to initate scan for the Wi-Fi network within the
range.

Connect to available Wi-Fi network . Tap on the SSID in the list and enter the password to
quickly connect to it. The phone will get IP address via DHCP from the wireless router.

Add Network . If the Wi-Fi network SSID doesn't show up in the list, or users would like to set up
advanced options for the Wi-Fi network, press MENU button and select "Add Network".
Then Enter SSID, Security type, password and set up address type (DHCP/Static IP/PPPoE) in
the prompt dialog. The phone will reboot with Wi-Fi network connected.

WPS Push Button . Press MENU button and select "WPS Push Button" for an easy and
secure Wi-Fi network setup. Once selected, check your router and press the Wi-Fi Protected
Setup (WPS) button on the router so that the Wi-Fi connection and security can be automatically
set up between the phone and the router. The phone should get network connection shortly after
successfully setup.

WPS Pin Entry . Press MENU button and select "WPS Pin Entry" for an easy and secure
Wi-Fi network setup. Once selected,a randomly generated PIN number will show on the phone for
you to enter it on your Wi-Fi router. The setup can take up to 2 minutes to complete and the phone
should get network connection once done.

Wi-Fi Direct . This is to set up peer-to-peer connection between two Wi-Fi Direct devices so that
they can share data and sync files. Press MENU button button and select "Search for
devices". Then tap on the available peer device to initiate connection.

Advanced Settings . Press MENU button and select "Advanced".
Network Notification : If enabled, the phone will show notification on the top status bar indicating
an open network is available. By default it's enabled.
Avoid Poor Connections : If enabled, Wi-Fi network won't be used unless the connection is good.
By default it's disabled.
MAC address : This shows the MAC address of the phone.
IP address :This shows the IP address of the phone from Wi-Fi network.