P a g e
|
54
GRP260x Administration Guide
Version 1.0.3.42
Account x
→
Hidden Number Plan
Hidden Number Feature
If set to "Yes", incoming and outgoing number display will be handled
according to hidden number plan.
Hidden Number Plan List
Currently, incoming and outgoing number display will be handled according
to hidden number plan. Users are able to configure the hidden number rules,
matching their syntax rules from top to bottom as follows:
1.
Expression
element(element)element
(element)element
element(element) (element)
2. Element Rules • x
：
any digit number from 0-9 • +
：
any length after x(>=1)
• \[-+...] or *
：
Escape symbol • ()
：
The part that needs to be hidden, there
can only be one hidden part in a rule
3.Examples x+(xxxx)xxxx: 13705806547 -> 137****6547 xxx(x+)xxxx:
07113705806547 -> 071*******6547 071\-x+(xxxx)xxxx: 071-13705806547
-> 071-137****6547
Hidden Number Plan Test
Enter the number to test the hidden rules of the current page. After
confirming, please save and apply it.
Hidden Number Plan
Enable Local Call Features
When enabled, Do Not Disturb, Call Forwarding and other call features can
be used via the local feature codes on the phone. Otherwise, the provisioned
feature codes from the server will be used. User configured feature codes
will be used only if server provisioned feature codes are not provided.
Note:
If the device is registered with Broadsoft account, it does not matter if
local call features are enabled or disabled, once the Broadsoft account is set,
special feature to Broadsoft and Feature Key Synchronization is enabled, the
call feature will be handled by Broadsoft server, not by the phone.
DND
DND Call Feature On
Configures DND feature code to turn on DND.
DND Call Feature Off
Configures DND feature code to turn off DND.
Call Forward Always
On
Configures Call Forward Always feature code to activate unconditional call
forwarding.
Off
Configures Call Forward Always feature code to deactivate unconditional call
forwarding.
Target
The extension the call will be forwarded to.
