GAC2570 User Manual
Version 1.0.1.23
P a g e
|
24
Powering and Connecting GAC2570
The GAC2570 can be powered on using PoE+ switch or injector using following steps:
•
Step 1:
Plug a RJ45 Ethernet cable into the network port of the GAC2570.
•
Step 2:
Plug the other end into the power over Ethernet (PoE+) switch or PoE+ injector.
Figure 3: Powering GAC2570
Press and hold “Power” button to turn on the GAC2570.
Note:
The GAC2570 has a built-in battery to run.
Connection Configuration
GAC2570 can be connected via HDMI IN port to a laptop for presentation sharing and linked via Micro USB
port to a GVC32xx or a laptop acting as an external MIC/Speaker and via 3.5mm port using a male-to-male
cable (not included in the package).
Figure 4: Connecting Wiring Seat
LAN
AC Outlet
PoE+ Injector