INTERIOR ROOF SUPPORT ASSEMBLY
5.12
Attach the L08E-X to the upper roof
section as shown with ML01/S04 fasteners
already in place where the 607 meets the 601B,
and the 609 and the 602B meet see , repeat
this on the front section.
5.13
Attach the L08D-X to the rear lower roof
section where ML01/S04 fasteners are already
in place where the 609 and the 602B meet, and
the 609 and the 601B meet see , repeat on
the front section.
5.14
Attach the BZ1’s to the roof line as shown
in diagram with the ML01/S04. We suggest
that you measure up 4
3/4
” from the 609 on
both sides to find proper placement of the
BZ1’s.
5.15
Use CZ1’s to support the interior wall at
the eave using the ML01/S04. See diagram .
We suggest that you measure down 9” and mark
it with a pencil so the base of the CZ-1 will meet
there.
36
STEP FIVE
L08E-X
L08D-X
L08D-X
CZ-1
CZ-1
BZ-1
4
3/4
”
9”
9”
4
3/4
”
L08D-X
L08E-X
BZ-1