TRAILERING
100
BOAT TOWING
Before towing your boat please refer to the trailer manufacturer’s manual and also note the
following:
The size and carrying capacity of the trailer should be suitable for the size and weight of your
boat including the engine. Do not use a trailer that is too big or too small for your boat.
Make sure that the trailer provides adequate support for the keel and roller sets that provide
large contact areas for the hull.
The boat must be properly inflated and the cockpit drain valves open.
Haul the boat onto the trailer using the bow eye.
Make sure that the outboard engine leg is in the “trailering position”. Refer to manufacturer’s
manual.
Secure the boat to the trailer with suitable straps or rope, using bow, lateral and rear eyes for
this purpose.
Close and secure all hatches and openings on the boat. Cushions must be placed in lockers or
removed to prevent loss during transit.
Do not trailer the boat with the overall cover in place, it is not designed for transportation.
Summary of Contents for S370N
