Grand S370N, Owner'S Manual

Page: 52 / 108

OPERATING THE CRAFT
52
BILGE PUMP (IF APPLICABLE)
The bilge pump serves to pump water out of the bilge area of the boat.
Fig. 25. Bilge pump.
The bilge pump is located in the drain well.
Pump specifications:
Capacity 1.9 m
3
/h (with zero head).
Power 12 V/1.6 А.
Maximum head 3 m.
Connection 3/4”.
Switching the bilge pump on and off is done manually by using the switch located on the steering
console.
Check the operation of the bilge pump by using the switch located on the steering console. Make
sure the inlet channels are free from contamination (see also sections - “SAFETY”, “RISK OF
FLOODING AND STABILITY”, “SAFETY EQUIPMENT”).
Bilge
pump