Freestanding Waterfalls Installation and Operation
Page 7
Bonding
Setscrew
Figure 1. Bonding on Freestanding Waterfall
3.2
Water Requirements
See water flow column in Section 2.3 Technical Information.
3.3
Installing the Waterfall
1. For all waterfalls, install the anchor at the height of the top of the deck
and connect the bonding cable to the anchor by wrapping the bonding
wire around the bonding lug. See Figures 2 through 6.
NOTE:
Be careful not to remove the protective film from the anchor.
2.8”
Cement
Cement
2.8”
Cement
Cement
7.60”
6.18”
3.94”
6.46”
7.87”
10.95”
9.53”
7.28”
6.46”
7.87”
AURA14
AURA14
AURA20
AURA20
Figure 2. Aura Waterfall Anchor Installation
