US0208-INS-LAB-RevB09 • Patriot
™
Homecare Bed
8
BED END ASSEMBLY
Full-electric bed only (US0458/US0458PL): Lock motor spring coupling
ROTATE TO UNLOCK
coupler
Unlocking
coupler
gearbox
coupler
SLIDE IN AND
ROTATE TO
LOCK
Locking
coupler
gearbox
Before attaching foot end, ensure that hi/lo motor spring coupling is retracted and locked to avoid
interference with end gearbox shaft as shown at above right.
All bed models: Assemble bed ends
1. Insert one locking and one non-locking caster into each bed end.
Locking casters must be in-
stalled diagonally from each other.
See previous page for full-electric caster position options.
2. Standing directly in front of the bed foot end, position it as close to the bed as possible.
3. With one hand, reach over end and lift up the bed.
bed end (foot)
frame (foot)
Attach bed end
4. Tilt the bed end slightly back toward you as shown above.
Engage lower rivet
lock
rivet
Lower bed onto lock
5. Engage lower rivet slightly with corner lock and tilt end toward bed as shown at above left.
6. Lower bed onto corner lock as shown at above right.
