Graham Field Lumex FR587W Series Assembly And Operating Instructions Manual Download | Manualshive

Page: 15 / 28

background image

LX_FR587W-INS-LAB-RevH21 15

Heat and Massage Feature —

Control Module and Transformer Unit

Showing All Connections Correctly Made

Handheld

Pendant

Connector

Heat & Massage

Connectors

Power Cord

Connector

Handheld

Pendant

Connector

Heat Only

Connectors

Power Cord

Connector

Heat Only Feature —

Control Module and Transformer Unit

Showing All Connections Correctly Made

2. The Control Module and Transformer, shown above, are contained in a single unit mounted in

the back compartment. The 8-foot power cord plugs into the wall AC outlet.

Heat and Massage / Heat only Installation Instructions

During recliner shipment, the Heat and Massage / Heat Only cable connections are disconnected.

Info: Model FR587WH (Heat and Massage) requires two connections; one for the control box

(the following step #4) and the other for the massage motor (the following steps #6 and 7).
Info: Model FR587WHO (Heat Only) requires one connection for the control box (the following

step #4).

CAUTION: To prevent personal injury and damage to the recliner always obtain assistance

when positioning the recliner as instructed in the following sections.

Heat and Massage Feature —

Control Module and Transformer Unit

Showing All Connections Correctly Made

Handheld

Pendant

Connector

Insert

Back

Massage

Connector

Here

Handheld

Pendant

Connector

Power Cord

Connector

1. Install the back assembly and gas spring on the seat frame with the clevis pins and clips

supplied with the recliner as indicated in your recliner’s Assembly and Operating Manual.

«
...
13
14
15
16
17
...
»

Summary of Contents for Lumex FR587W Series





























Reviews:

No comments

Related manuals for Lumex FR587W Series

Brand: Camozzi Pages: 2

Brand: Oktober Pages: 22

Brand: Harken Pages: 4

Brand: K&K Pages: 8

ABS-Lock DH04 Series

Brand: ABS Pages: 4

Brand: vanEE Pages: 52

Brand: Caddon Hives Pages: 3

Brand: Nektar Pages: 12

Brand: Nautilus Pages: 17

Brand: National Instruments Pages: 6

Brand: VelociRAX Pages: 4

Brand: ABM Pages: 17

Brand: Össur Pages: 50

Brand: Össur Pages: 13

PRO-FLEX XC PXC0xyyz

Brand: Össur Pages: 68

Brand: Össur Pages: 25

Brand: Össur Pages: 2

Brand: Össur Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands