APC-US-INS-LAB-RevC18 15
3.5 HEIGHT AND TOP ADJUSTMENT
3.5.4 All Models: Quick Drop Activation
This chair is equipped with a manual override
function for the back section of the chair. This
option should only be used in an emergency
situation. To activate the quick drop, support
the back section and pull upward on the red
activating handle located on the back of the
chair (Figure 3-13).
3.5.5 Hydraulic Model: Raising the
Height
To elevate the unit, pump the UP pedal, using
smooth, complete strokes to ensure patient
comfort (Figure 3-14). When the unit reaches the
desired height, stop the pumping action.
Info: Pedals are located on both sides of the
unit.
s
NOTICE: Do not stand on the pedal; it could
damage the unit.
3.5.6 Hydraulic Model: Lowering the
Height
To lower the unit, depress and hold the DOWN
pedal (Figure 3-15).
Info: Pedals are located on both sides of the
unit.
s
NOTICE: Do not stand on the pedal; it could
damage the unit.
3.5.7 Hydraulic Model: Top Adjustment
To adjust the unit anywhere between chair
position and stretcher position, grasp the recline
handle (A in Figure 3-16), adjust the unit to the
desired position, then release the handle.
3.5.8 Hydraulic Model: Trendelenburg
Adjustment
Info: The unit must first be in the chair position
before adjustment into the Trendelenburg
position.
Grasp the Trendelenburg handle (B in Figure
3-16), adjust the unit to the Trendelenburg
position, then release the handle.
FIGURE 3-13
FIGURE 3-14
FIGURE 3-15
FIGURE 3-16
