LCM-INS-LAB-RevD18 14
8 TROUBLESHOOTING
The following list of problems, their causes and solutions will assist you in determining what may
be causing your Select Air Mattress not to function as designed. If a problem occurs which is not
listed below, contact GF Tech Support at 1.770.368.4700 for further information. Do not attempt to
repair components or parts, as this may invalidate your warranty or cause further problems that
may result in patient injury. Stop using your mattress immediately if it is not functioning correctly
or any warning beeps are heard.
If any of the following symptoms occur, follow the steps below to troubleshoot.
Review all selections of this manual before troubleshooting any Select Convertible Mattress.
Do not attempt any troubleshooting not shown in this manual or where the remedy recommends
contacting a GF authorized distributor. Any unauthorized service, modification, alteration, or
misuse may lead to serious injury and / or product damage and will void all applicable warranties.
SYMPTOM
POSSIBLE CAUSE
SOLUTION
Green lamp on pump does not
light when power switch is set to
ON position.
Power cord may be unplugged.
Plug in Power cord.
Wall outlet may be controlled by a wall
switch.
Plug Power cord into different wall outlet.
Circuit breaker for wall switch may be
tripped or blown.
Reset circuit breaker or replace fuse.
Power cord or power switch may be
damaged.
Contact GF authorized distributor for
assistance.
Mattress does not inflate or
become firm; yellow LED remains
illuminated (does not change to
green LED).
Tubing not connected properly.
Ensure blue hoses are connected to
hoses marked with blue tag for Alternating
Pressure; check tubing inside mattress for
loose connectors.
Tube kinked.
Check tubing inside mattress for kinks.
Tubing disconnected.
Check tubing inside mattress for possible
disconnect.
Holes in or damage to mattress.
Contact GF authorized distributor for
assistance.
Pump may be damaged.
Contact GF authorized distributor for
assistance.
Mattress cover too wrinkled upon
removal from shipping container.
Internal components have not
accommodated to environment. (This
does not affect inflation or function).
Set unit up and allow to run for 24 hours,
if problem persists, contact GF authorized
distributor for assistance.
WARNING: If you experience a problem with your convertible mattress and are unable
to service it yourself, contact GF Tech Support at 1.770.368.4700 or your GF authorized
distributor.
Summary of Contents for LUMEX SELECT LCM3580
Page 18: ...LCM INS LAB RevD18 18 NOTES...