Blas I
Mounting instructions
TDO_PRD_158_00_Blas I_mounting_instructions
Page 1: ...Blas I Mounting instructions TDO_PRD_158_00_Blas I_mounting_instructions ...
Page 2: ...2 1 Loosen both screws on the end cap 2 Remove the end cap 3 Pull out connector board and flip it 1 2 T15H 3 ...
Page 3: ...3 1 Flip and push connector board back in the housing 2 Attach the end cap and tighten the screws 3 Attach the Ceiling KIT 8 1 Feed cable through the designated power hole 2 Connect wires 5 7 6 4 ...
Page 4: ...izzato TR Montaj ve Bakim sadece yetkili personel taranndan yapilmalidir H A szerelést karbantártast csak szakszemélyzet végezheti N Monteres kun av fagpersonell NL Montage service alleen door vakkundig personeel R Монтаж обслуживание только специалистами P Montagem Manutenção efectuada unica mente por pessoal técnico especializado GR Topoqέthsh Suvtήphsh móvo apó hlektpológo SK CZ Montáž a údržba...
