manualshive.com logo in svg

Grady-White Boats Freedom 325, Owner'S Manual, Page: 73 / 80

Share
Download
Grady-White Boats Freedom 325 Owner'S Manual Download Page 73

8-21

Chapter 8: Freedom 325

Safety Labels and Location

The safety labels shown below for this model should be inspected regularly. To ensure safety 

in normal operation, replace any labels on your boat that become damaged, missing or weathered 
such that they are no longer legible. Replacement labels may be obtained from any Grady-White 
dealer or by contacting the Grady-White customer service department at 252-752-2111 or 
[email protected].

ROTATING PROPELLER MAY CAUSE

SERIOUS INJURY OR DEATH.

DO NOT APPROACH OR USE

LADDER WHEN ENGINE IS RUNNING.

WARNING

ROTATING PROPELLER MAY CAUSE

SERIOUS INJURY OR DEATH.

SHUT OFF ENGINE WHEN

NEAR PERSONS IN THE WATER.

WARNING

WARNING

Carbon monoxide (CO) can cause brain damage or death

Engine and generator exhaust contains odorless and colorless carbin monoxide gas.

Signs of carbon monoxide poisoning include nausea, headache, dizziness, or drowsiness, and lack

of consciousness.

Get fresh air if anyone shows signs of carbon monoxide poisoning.

See Owner's Manual for information regarding carbon monoxide poisoning.

DANGER

Carbon monoxide (CO) can cause brain damage

or death

Engine and generator exhaust contains odorless

and colorless carbin monoxide gas.

Carbon monoxide will be around the back of the

boat when engines or generators are running.

Move to fresh air, if you feel nausea, headache,

dizziness, or drowsiness.

DOOR MUST BE CLOSED

AND LOCKED WHILE

ENGINES ARE IN

OPERATION

WARNING

TO AVOID PERSONAL INJURY,

KEEP HANDS FREE OF WINDLASS

AND ROPE WHEN OPERATING

CAUTION

WARNING

AVOID SERIOUS INJURY OR DEATH

FROM FIRE OR EXPLOSION

RESULTING FROM LEAKING FUEL.

INSPECT SYSTEM FOR LEAKS AT

LEAST ONCE A YEAR

THIS MARINE HEAD SYSTEM WILL

FLUSH, MACERATE, AND DISCHARGE

WASTE AND MARINE/RV TOILET

TISSUE ONLY. ANY OTHER

MATERIALS CAN RESULT IN DAMAGE

OR SYSTEM MALFUNCTION.

CAUTION

Inside Aft Rigging

Compartment

Inside Console,

Next to Head

DO NOT TURN BREAKER

ON WITHOUT WATER

IN THE WATER HEATER

CAUTION!

Inside Console,

On AC/DC Panel

CAUTION

LATCHES MUST BE SECURED

WHEN LID IS CLOSED TO

MAINTAIN SELF-BAILING

COCKPIT CAPABILITY.

Gasoline vapors are

explosive. Open

flames can ignite

gasoline vapors

causing injury or

death from fire or

explosion. Do not

operate grill when

fueling.

WARNING

Below Grill

(Optional)

Summary of Contents for Freedom 325

















































































Reviews:

No comments