Grady-White Boats Express 305, Owner'S Manual

Page: 66 / 105

3 0 5 E
X P R E S S
8–16
AC Transfer Switch
If your Express 305 is equipped with a generator, there will be a transfer switch located in the
cabin beneath the AC/DC panel. This switch permits you to operate your AC accessories by either
shore power or generator. This switch prevents the operation of the shore power and the generator
simultaneously.
Blower
A blower is included with the generator option. The blower provides ventilation to the engine
compartment and should run at least 4 minutes before starting the generator. Using the blower
does not take the place of checking the engine compartment by sight and smell for gasoline
vapors. The blower is located in the aft rigging compartment beside the batteries.
Generator Start/Stop Switch
The generator start/stop switch is located in the cabin beneath the AC/DC panel. This switch
permits you to start and stop your optional generator from the cabin.
O
UTRIGGERS
The optional outriggers spread the fishing lines being trolled from your boat and decrease the
chance of entanglement.
• Advantages
Advantages of outriggers include offering bait throughout a larger area behind the boat,
placing bait out of the wake zone, automatic drop back following strikes (which allows for
fish to completely accept bait), and a reduction in unnecessary twisting action characteristic of
artificial bait.
• Instructions
For installation and use, reference the sheet included in your Owner’s Packet.
• Care And Maintenance
- Outriggers should be washed with freshwater, mild soap, and a soft cloth. Never use abra-
sive cleaners on outriggers.
W A R N I N G
End-of-Life (EOL)
The carbon monoxide detector is equipped with a 5 year EOL timer, which operates continuously
and independently from a lithium battery. When the timer has run for 4 years and 11 months
from the date of manufacture, the unit will signal the first EOL alarm: The green LED will turn
off, the red LED will turn on and the alarm will beep every 30 seconds.
To temporarily reset the device to normal operation after the EOL alarm occurs, press and hold
the test/silence button until both lights come on. It will be reset for 72 hours and this process can
be repeated for 30 days. After 30 days the unit will continuously signal EOL and must be
replaced, as it will no longer detect CO.
!