Gradall XL3100IV, Operators Safety Manual

Page: 150 / 172

Section 5 - Lubrication & Maintenance
5-36 80804002
750 Hours
Replace In-Line Pilot Filter
In-Line Pilot Filter Element
1. Perform shutdown procedure on page 3-14 or page 3-33.
2. Locate in-line pilot filter (1) located on hydraulic tank (2) .
3. Remove oil drain plug (3) . Drain oil into a suitable container.
4. Unscrew bowl (4) and remove filter element from element location spigot in the
filter head.
5. Replace the filter element. Verify that the designation corresponds to that of the
old element and place filter element carefully into the element location spigot in
the filter head.
6. Screw in bowl fully, then unscrew by one quarter-turn. Replace oil drain plug.
750
OAC1090
OW1180
OAC1980
1
2
3
4