Graco VPM 12, Instructions Manual

Page: 87 / 88

Technical Data
313875J 87
Technical Data
Dimensions
The dimensions of the machine vary by machine layout.
Air Inlet Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-100 psi (0.59-0.69 MPa, 5.9-6.9 bar)
Wetted Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless steel, UHMW, carbon steel
Fluid Viscosity Range . . . . . . . . . . . . . . . . . . . . . . . . . . Paste
Fluid Flow Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VPM-25: 12-25 kg/min (26-55 lb/min)
VPM-12: 10-12 kg/min (22-26 lb/min)
Hydraulic Reservoir Capacity . . . . . . . . . . . . . . . . . . . . 8 gal. (30 liters) each
Recommended Hydraulic Fluid . . . . . . . . . . . . . . . . . . . Citgo A/W Hydraulic Oil, ISO Grade 46
Ref VPM-25 VPM-12
A (Height) Ram in the lowered position:
9 ft 3 in.
(2.82 m)
Ram in the raised position:
11 ft 4 in.
(3.45 m)
Ram in the lowered position:
9 ft 3 in.
(2.82 m)
Ram in the raised position:
11 ft 4 in.
(3.45 m)
B (Width) 7 ft 8 in.
(2.34 m)
7 ft 8 in.
(2.34 m)
C (Depth) 15 ft 10 in.
(4.83 m)
6 ft 1 in.
(1.86 m)
A
C
B
VPM-25 Shown
ti17693a