Appendix B - ADM Setup Screens Overview
60
313875J
Sequences
This screen allows the user to edit sequence definitions.
The contents of this screen change based on the Dis-
pense mode.
Dispense detail is shown as volume, time, or weight
depending on which Dispense Mode is selected. See
on page 61 for Dispense Mode options.
NOTE:
5 sequences with 20 positions each are avail-
able across 10 pages.
Calibration - Main
This screen shows calibration data for the system and
provides access to the individual calibration screens.
See
on page 34 for
how to use the calibration screens.
The date next to each key represents the last time that
function was performed.
The “Cal. Min” and “Cal. Max” values are the system
recognized extreme ends of piston travel.
Calibration - Learn Mode
This screen is for learning the mechanical limits for pis-
ton travel.
Calibration - Weight
This screen is for calibrating weight.
Calibration - Flow Meters
This screen is for calibrating the flow meters.
Summary of Contents for VPM 12
Page 9: ...A Red and B Blue Components 313875J 9...
Page 50: ...Maintenance 50 313875J...
