Appendix B - ADM Setup Screens Overview
313875J
59
Appendix B - ADM Setup Screens Overview
Setup Screens Navigation Diagram
Shots
This screen allows the user to edit shot definitions. The
contents of this screen change based on the Dispense
Mode. Shots may be defined by flow rate and by
time (duration), volume, or weight depending on the Dis-
pense Mode selection. See
on page 61 for
Dispense Mode options.
Using the
button
The
button can be used to change multiple shot
definitions at once.
1.
From the Shots screen, press
.
2.
Press .
3.
Navigate to a shot definition value.
4.
Type the new value then press enter. All values
below the selected shot will change to the new
value.
5.
Repeat the previous two steps as desired.
6.
Press
to
deactivate.
Using the
button
The
button can be used to calculate an x:1 ratio
from a non x:1 ratio. For example, if the desired ratio is
5:2, the
button can be used to convert 5:2 to 2.5:1.
1.
From the Shots screen, press
.
2.
Navigate to the
column.
3.
Press .
4.
Enter the non x:1 ratio in the
column. The cal-
culated x:1 ratio will automatically be displayed in
the
column and in the shot definition.
5.
Press
.
Calibration
Maintenance
Shot #1
Shot #2
Shot #...
Sequences #1
Sequences #2
Sequences #...
Advanced #1
Advanced #2
Advanced #...
System #1
System #2
System #3
Supply
Conditioning #1
Conditioning #2
Conditioning #3
Summary of Contents for VPM 12
Page 9: ...A Red and B Blue Components 313875J 9...
Page 50: ...Maintenance 50 313875J...
