Maintenance
313875J
49
Advanced Display Module (ADM)
Replace Battery
A lithium battery maintains the ADM clock when power
is not connected.
To replace the battery:
1.
Disconnect power to the ADM.
2.
Remove rear access panel.
3.
Remove the old battery and replace with a new
CR2032 battery.
4.
Replace rear access panel.
Install Upgrade Token
on page 48.
Cleaning
Use any alcohol-based household cleaner, such as
glass cleaner, to clean the ADM. Spray on the rag then
wipe ADM. Do not directly spray the ADM.
Motor Control Module (MCM)
Keep heat sink fins clean at all times. Clean them using
compressed air.
NOTE:
Do not use conductive cleaning solvents on the
module.
Install Upgrade Token
See
on page 48.
Fluid Control Module (FCM)
Install Upgrade and Key Tokens
See
on page 48.
ti12903a
F
IG
. 15: Clean Heat Sink Fins
r_257396_3b9905_02b
Heat
Sink Fins
Summary of Contents for VPM 12
Page 9: ...A Red and B Blue Components 313875J 9...
Page 50: ...Maintenance 50 313875J...
