Graco ToughTek MP40, Operation Manual

Page: 33 / 48

Parts
3A4349B 33
Motor Assemblies (Ref. 10)
MTA738 (for MP-20, MP-20 16A)
Parts List
07$BWLD
Apply pipe sealant to threads.
Apply grease lubricant to the shaft of the motor before assembly.
Match orientation of grease port to port in frame.
Add grease lubricant through grease port (5) after assembly.
1
2
3
4
Ref. Part Description Qty.
1 FRAME, mount, motor, short 1
2 MTA019 ADAPTER, motor flange 1
3
❖
SEAL, grease, shaft, motor 1
4
❖
PIN, 3/16 dia x 3/8 dowel 4
5 115278 FITTING, zerk, grease, 1/4-28 unf 1
6 MTA073 SEAL, flange, motor 1
7
✿
LATCH, catch, draw, batch, mixer 1
8
✿
WASHER, 3/8 plain flat 2
9
✿
SCREW, shcs, 3/8-16 x 1/2 2
10
✿
PIN, draw, assy 1
11 † MOTOR, gearbox, 4kW 1
12 110837 SCREW, flange, hex 4
13 MTA020†
❄
KEY, special, drive 1
14 SPACER, 4kw, motor 1
15 MTA014
❄
ADAPTER, auger/pump 1
16
❄
SCREW, set 1/4-20 x .25 soc cup 2
17 † BUSHING, strain relief, nut 1
18 † BUSHING, strain relief 1
19 MTA784† CABLE, motor, 4kw, 6 ft 1
20 † PLUG, liquid tight, 1.0 in. 1
Ref. Part Description Qty.
Symbol Kit Description Included in Kit: Ref. (Qty.)
† MTA699 4kW Motor Kit 11 (1), 13 (1), 17 (1), 18 (1), 19 (1), 20 (1)
❖
MTA731 Motor Shaft Grease Seal Replacement Kit 3 (1), 4 (4)
✿
MTA730 Draw Catch Latch Kit 7 (1), 8 (2), 9 (2), 10 (1)
❄
MTA791 Driver Auger/Pump Adapter Kit 13 (1), 15 (1), 16 (2)