Maintenance
72
3A0294J
Upgrade Display Software
1.
Disconnect power.
2.
Pull display out of bracket clips to remove it.
3.
Remove screw and then access cover.
4.
Insert and press token firmly into slot.
NOTE: There is no preferred orientation of token.
5.
Turn power on.
6.
The red indicator light will flash until new software is
completely loaded.
7.
Turn power off.
8.
Remove token.
9.
Reassemble access cover and screw.
10. Snap display back into bracket and reconnect
power.
Clean User Interface Display
Use any alcohol-based household cleaner, such as
glass cleaner, to clean the display.
NOTICE
To avoid damaging circuit board, wear a grounding
strap.
F
IG
. 105: Upgrade Display Software
Indicator
Token
Screw
Access
r_26416_3a0294_token_explode
Light
Cover
Summary of Contents for SmartWare 262370
