Motor Controls and Indicators
309551C
13
Motor ON/OFF Key/LED
Press
to turn motor ON and OFF. Also clears
some motor control diagnostic codes, see page 35.
PARK Key/LED
Press
at end of day to cycle component A pump
to home position, submerging displacement rod. Trigger
gun until pump stops. Once parked, motor will automati-
cally shut off.
PSI/BAR Keys/LEDs
Press
or
to change pressure scale.
Pressure Key/LED
Press
to display fluid pressure.
Cycle Count Key/LED
Press
to display cycle count.
Pressure Arrow Keys
Press
or
to adjust fluid pressure when
motor is ON. Setpoint displays for 10 sec.
When motor is OFF, pressing
will enter jog mode.
To exit jog mode, press
until display shows
dashes or current pressure.
Pressure/Cycle Display
Shows fluid pressure or cycle count, depending on
mode selected.
Displays J 1 through J 10 when in jog mode, page 34.
If pressures are imbalanced, display shows higher
of two pressures.
PSI
BAR
To clear counter, press and hold
for 3 sec.
