Start Up
3A7656C
15
6.
Turn ON/OFF Switch to
ON
position.
7.
Turn Pressure Control Knob to
Prime/Slow to start motor.
8.
When sprayer starts pumping, water and
air bubbles will be purged from the
system. Allow fluid to flow out of drain
tube for 1 to 3 minutes.
9.
Turn ON/OFF Switch to
OFF
position.
Fill Pump
1.
Turn Pressure Control Knob to lowest
setting.
2.
Turn ON/OFF Switch to
ON
position.
3.
Place Suction Tube in pail of
disinfectant. Place Drain Tube in waste
bucket.
4.
Turn Pressure Control Knob to Prime/
Slow to start motor. Wait until disinfectant
flows from the Drain Tube.
5.
Turn ON/OFF Switch to
OFF
position.
