Fluid Heater
24U843 — 10kW, 2–zone
24U842 — 7.5 kW, 1–zone
1
Torque to 120 ft-lbs (163 N•m).
2
Torque to 23 ft-lbs (31 N•m).
3
Torque to 40 ft-lbs (54 N•m).
4
Apply thermal paste.
5
Apply pipe sealant and PTFE tape to all non-swiveling threads and threads without o-rings.
6
Apply lithium grease lubricant to o-rings before assembling in block (1).
7
Remove tape from probe tip and Orientate sensor as shown. Insert probe until it bottoms on heating element.
Tighten ferrule on sensor probe 3/4 turn past finger tight.
78
333024A
