Graco Power-Lock, Instructions - Parts Manual

Page: 9 / 24

Installation
309572M 9
Connect Heated Hoses
1. Lay heated hoses end to end, matching the
color coding. Red for component A (ISO),
blue for component B (RES).
2. Connect fluid hoses (A, B).
3. Connect air hoses (C).
4. Connect electrical wires.
a. Ensure electrical wires ends are 5/8 in.
(0.625mm) long. If they are not, use a
sharp scissors to strip all four wire ends
to the correct length. See Strip Length
Gauge for correct length.
WARNING
Read warnings, pages 6 and 7.
F
IG
. 1
F
IG
. 2
Do not connect the main air supply to
the air hose at this time.
Common insulated heated hoses do not
contain an air hose.
A
B
TI2678B
TI2679B
B
A
F
IG
. 3
F
IG
. 4
Be careful not to cut or nick copper
strands. If more than five strands are cut
or nicked, trim wire and re-strip.
New hoses are pre-stripped at correct
length; remove insulation to expose bare
wire.
C
TI2682B
D
D
Strip Length Gauge
1:1 Scale
5/8 in.
TI9733a
(0.625 mm)